Hardwood Flooring Cost in Dallas-Fort Worth
What refinishing, installation, and repair really cost in the DFW metroplex, plus the factors that move your price up or down.
How much does hardwood flooring cost?
In the Dallas-Fort Worth area, hardwood floor refinishing typically runs $3 to $8 per square foot, and new hardwood installation runs $6 to $15 per square foot installed. A single refinished room often lands between $1,100 and $2,400, while installing solid hardwood in a 500 square foot space commonly falls between $4,000 and $9,000. Wood-look LVP and laminate are the budget-friendly options at $3 to $7 per square foot installed.
Every floor is different, so the numbers below are typical DFW market ranges rather than a fixed quote. Square footage, the condition of the wood, the species, the finish you choose, and details like stairs all change the final price. We give you a clear, itemized quote after seeing your floor in person.
2026 Price Ranges
Hardwood flooring cost by service
| Service | Typical cost | Typical project |
|---|---|---|
| Hardwood floor refinishingSanding and recoating existing solid or engineered wood. Staining, water-based finishes, and heavy repairs push toward the top of the range. | $3 to $8 per sq ft | $1,100 to $2,400 for one room |
| Solid hardwood installationMaterials plus labor for new solid wood. Species, board width, and pattern (herringbone, borders) affect the price. | $8 to $15 per sq ft installed | $4,000 to $9,000 for 500 sq ft |
| Engineered hardwood installationA stable, cost-friendly alternative to solid wood, good over concrete slabs common in DFW builds. | $6 to $12 per sq ft installed | $3,000 to $7,000 for 500 sq ft |
| Luxury vinyl plank (LVP) installationWaterproof and durable. The most budget-friendly wood-look option for busy households. | $3 to $7 per sq ft installed | $1,500 to $3,500 for 500 sq ft |
| Laminate installationA hard-wearing, wood-look floating floor at the lower end of the installation range. | $3 to $6 per sq ft installed | $1,500 to $3,000 for 500 sq ft |
| Hardwood floor repairBoard replacement, water-damage patching, and weaving new wood into an existing floor. Small patches sit at the low end. | $200 to $1,000 per job | Priced by scope, not square foot |
| Deep cleaningProfessional cleaning that lifts built-up grime without the cost of a full refinish. | $1 to $2 per sq ft | $300 to $600 for a typical home |
| Screen and recoatA light buff and fresh finish coat that refreshes floors without a full sand-down, when the wood itself is sound. | $1 to $2.50 per sq ft | $400 to $900 for a typical home |
| Hardwood wax removalStripping old wax buildup so a durable modern finish can bond. Usually a step before recoating or refinishing. | $1.50 to $3 per sq ft | Often paired with refinishing |
Ranges reflect typical materials and labor in the Dallas-Fort Worth market and are not a quote. Your price depends on the condition, size, and details of your specific floor.
Installation cost by floor type
Installed cost is the material plus labor to put a new floor down. Solid hardwood sits at the top of the range and holds its value best, while engineered wood, LVP, and laminate bring the cost down without giving up the wood look.
- Solid hardwood: $8 to $15 per square foot installed. The premium, sand-again-later choice.
- Engineered hardwood: $6 to $12 per square foot installed. Stable over DFW concrete slabs.
- Luxury vinyl plank (LVP): $3 to $7 per square foot installed. Waterproof and family-proof.
- Laminate: $3 to $6 per square foot installed. The most economical wood-look floor.
Where the Number Comes From
What affects the cost of your floor
Square footage
Larger jobs cost less per square foot, since setup and mobilization are spread across more area.
Floor condition
Cupping, deep gouges, pet stains, and water damage add repair time before finishing can start.
Wood species and grade
Exotic species and wider or longer boards cost more than standard red oak or white oak.
Stain and finish
Custom stain colors and premium water-based finishes cost more than a natural oil-based coat.
Stairs and detail work
Staircases, closets, thresholds, and intricate layouts are labor-heavy and priced separately.
Prep and old coatings
Removing old wax, glue, or carpet and leveling the subfloor adds to an installation or refinish.
Is it cheaper to refinish or replace?
When the existing wood is solid and thick enough to sand, refinishing is almost always the cheaper choice. Refinishing a room might cost $1,100 to $2,400, while tearing out that same room and installing new solid hardwood can run two to three times as much. Replacement earns its cost when boards are rotted, badly warped, or already sanded too thin to save. If you are not sure which camp your floor is in, that is exactly what our in-home assessment answers.
Honest Pricing
No pressure, no surprises
Itemized Quotes
You see exactly what each part of the job costs before we start.
Since 1999
Decades of DFW floors means accurate, realistic pricing.
Licensed & Insured
Your home and your investment are protected.
Workmanship Warranty
We stand behind the work, not just the estimate.
Hardwood flooring cost questions
How much does it cost to refinish hardwood floors in Dallas-Fort Worth?
Refinishing typically runs $3 to $8 per square foot in the DFW area. A single room often lands between $1,100 and $2,400, and a whole first floor of around 1,000 square feet commonly falls between $3,000 and $8,000. Staining, water-based finishes, and repairs raise the total.
How much does hardwood floor installation cost?
Installed solid hardwood usually runs $8 to $15 per square foot, engineered hardwood $6 to $12, and wood-look LVP or laminate $3 to $7. For 500 square feet, that is roughly $4,000 to $9,000 for solid wood and $1,500 to $3,500 for LVP, including materials and labor.
Is it cheaper to refinish or replace hardwood floors?
Refinishing is almost always cheaper than replacing when the existing wood is solid and thick enough to sand. Refinishing a room might cost $1,100 to $2,400, while tearing out and installing new solid hardwood in the same room can run two to three times that. Replacement makes sense when boards are rotted, warped, or already sanded too thin.
How much does it cost to refinish 1,000 square feet?
At $3 to $8 per square foot, 1,000 square feet of refinishing typically costs $3,000 to $8,000 in the DFW market. The final number depends on the finish you choose, whether you add a stain color, and how much repair the floor needs first.
Does adding a stain color cost more?
Yes. Custom staining adds labor and dry time, so it usually moves a refinishing job toward the higher end of the range. A natural finish with no stain is the most economical option.
Why do you not just publish a flat price?
Every floor is different. Square footage, wood condition, species, finish, and stairs all change the number, so a flat rate would either overcharge simple jobs or underquote complex ones. We give you a clear, itemized quote after seeing the floor.
Explore Services